Fuji Electric Frenic-Mini Supplement To Instruction Manual

1
Supplement to Instruction Manual
Compact Inverter
Three-phase 200 V series: FRN0001 to 0020C2S-2U
Three-phase 400 V series: FRN0002 to 0011C2S-4U
Single-phase 200 V series: FRN0001 to 0012C2S-7U
Thank you for purchasing our FRENIC-Mini series of inverters.
• This manual is a supplement to the FRENIC-Mini Instruction Manual (INR-SI47-1729-E),
contains descriptions complying with UL standard.
For other descriptions, refer to the original manual.
• Improper handling might result in incorrect operation, a short life, or even a failure of this
product as well as the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this
product is discarded.
• For instructions on how to use an optional device, refer to the instruction and installation
manuals for that optional device.
Fuji Electric Co., Ltd. INR-SI47-1847-E

Fuji Electric Frenic-Mini Specifications

General

Model	Frenic-Mini
Category	Inverter
Voltage Class	Single-phase 200V, Three-phase 200V, Three-phase 400V
Output Frequency Range	0.1 to 400Hz
Control Method	V/f Control, Dynamic Torque Vector Control
Enclosure Rating	IP20
Input Voltage	3-Phase 200-240V, 380-480V
Output Power Range	0.1kW to 15kW
Overload Capacity	150% for 1 minute
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Braking Unit	Built-in
Cooling Method	Fan cooling
Ambient Temperature	-10 to +50°C
Storage Temperature	-20°C to +60°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level