Fuji Electric FRENIC-MEGA User Manual

Instruction Manual
High Performance, Multifunction Inverter
Thank you for purchasing our FRENIC-MEGA series of inverters.
• This product is designed to drive a three-phase induction motor. Read through this instruction manual and be familiar with
the handling procedure for correct use.
• Improper handling might result in incorrect operation, a short life, or even a failure of this product as well as the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this product is discarded.
• For how to use an optional device, refer to the instruction and installation manuals for that optional device.
Fuji Electric Systems Co., Ltd. INR-SI47-1335-E
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Fuji Electric FRENIC-MEGA Specifications

General

Series	FRENIC-MEGA
Input Frequency	50/60 Hz ±5%
Cooling Method	Forced air cooling
Enclosure Rating	IP20
Power Range	0.4kW to 630kW
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground fault, Short circuit
Protection Class	IP20
Communication Protocols	EtherNet/IP, Profibus
Operating Temperature Range	-10°C to +50°C
Storage Temperature Range	-20°C to +65°C
Humidity Range	5% to 95% (non-condensing)
Altitude	Up to 1000m above sea level