Fuji Electric Frenic-Mini Instruction Manual

Instruction Manual
Compact Inverter
Thank you for purchasing our FRENIC-Mini series of inverters.
• This product is designed to drive a three-phase induction motor. Read through this instruction
manual and be familiar with the handling procedure for correct use.
• Improper handling might result in incorrect operation, a short life, or even a failure of this
product as well as the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this
product is discarded.
• For how to use an optional device, refer to the instruction and installation manuals for that
optional device.
Fuji Electric FA Components & Systems Co., Ltd. INR-SI47-0791c-E

Fuji Electric Frenic-Mini Specifications

General

Model	Frenic-Mini
Category	Inverter
Voltage Class	Single-phase 200V, Three-phase 200V, Three-phase 400V
Output Frequency Range	0.1 to 400Hz
Control Method	V/f Control, Dynamic Torque Vector Control
Enclosure Rating	IP20
Input Voltage	3-Phase 200-240V, 380-480V
Output Power Range	0.1kW to 15kW
Overload Capacity	150% for 1 minute
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Braking Unit	Built-in
Cooling Method	Fan cooling
Ambient Temperature	-10 to +50°C
Storage Temperature	-20°C to +60°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m above sea level