Fuji Electric FSC-2 - 10.3.2 “ANALOG INPUT;OUTPUT”: when performing analog input;outputand calibration

INF-TN2FSC-E 101



ENT


 


AIch2
AO
AIch1
Red
(+)
Red
(+)
Black
(−)
Black
(−)
4 to 20mA
AO
(Output)
Indicator,
recorder,
regulator, etc.
(Note) The connector should
be connected to AI/AO.
Analog output: 4 to 20mA DC 1 point “Load resistance under 600Ω”
Analog input: 4 to 20mA DC 1 point “Input resistance 200Ω”
4 to 20mA DC 1 point “Input resistance 200Ω” or
1 to 5V DC 1 point
Analog input/output cord (page 20)
−
＋
AI
(Input)