Fuji Electric FSC-2 - 10.3.3 “ENERGY MODE”: when measuring consumed heat quantity

INF-TN2FSC-E 109
 





ENT


Heat
source
Load
Detector
(type : FSS)
Converter
Converter
Q: Flow rate of the
heating medium
T2: Temperature of the heating
medium of the receiving side
T1: Fluid temperature (inlet)
Flowmeter (Type: FSC)
Consumed heat quantity
q = K · Q · (T1–T2)
K : heat quantity
conversion factor
(For heating K = 4.123,
For cooling = 4.186)
Temperature
sensor
Temperature
sensor
AI/AO


