Fuji Electric FSC-2 - Page 83

196 pages

To Next Page

To Previous Page

74 INF-TN2FSC-E

  





ENT





 

ENT



Main Page

PREFACE2
CONTENTS3
WARNING SYMBOLs AND THEIR MEANINGs6
SAFETY PRECAUTIONS7
1. OVERVIEW10
2. CHECK OF DELIVERED ITEMS11
- 2.1 On purchase of flow transmitter (type: FSC)11
- 2.2 On purchase of transit time detector (type: FSS)12
- 2.3 On purchase of flow velocity distribution measurementdetector (type: FSD)13
3. CHECK MODEL AND SPECIFICATION14
4. NAME AND EXPLANATION OF EACH PART17
- 4.1 Name and explanation of main unit and detector17
- 4.2 Explanation of keys19
- 4.3 Handling of SD memory card20
5. CHARGE METHOD AND OPERATION POWER SUPPLY25
- 5.1 Operating power supply25
- 5.2 Turning on the power and language preference27
- 5.3 Power OFF28
6. WIRING29
- 6.1 Diagram29
- 6.2 Connection of dedicated cables29
- 6.3 Connection of analog input/output cable(4 to 20 mA DC)30
- 6.4 Connection of USB cable30
7. INPUT OF PIPING SPECIFICATIONS31
- 7.1 Display of pipe setup screen31
- 7.2 Entry of site name (not required measurement)34
- 7.3 Outer diameter of piping (unit: mm)37
- 7.4 Piping material38
- 7.5 Wall thickness (unit: mm) (range: 0.1 to 100.00mm)39
- 7.6 Lining material40
- 7.7 Lining thickness (unit: mm) (range: 0.01 to 100.00 mm)41
- 7.8 Kind of fluid42
- 7.9 Viscosity43
- 7.10 Selection of sensor mounting method44
- 7.11 Kind of sensor45
- 7.12 Transmission voltage (used when an indicator is 1 orless during measurement)46
- 7.13 Completion of PROCESS SETTING47
8. MOUNTING OF DETECTOR48
- 8.1 Selection of mounting location48
- 8.2 Selection of detector51
- 8.3 Processing of mounting surface53
- 8.4 How to mount FSSC to pipe54
- 8.5 How to mount FSSD to pipe62
  - 8.5.1 How to mount a detector (V method)62
  - 8.5.2 How to mount a type FSSD3 (Z method)63
- 8.6 How to determine the attachment positions of the mediumand large size detectors65
- 8.7 How to attach the type FSSE66
  - 8.7.1 How to connect the signal cable66
  - 8.7.2 How to mount large size sensor to pipe67
- 8.8 How to mount FSSH to pipe69
  - 8.8.1 How to mount a sensor (V method)69
  - 8.8.2 How to mount a sensor (Z method)70
- 8.9 How to fold gage paper(used for determining mounting position)72
9. START MEASURING73
10. SETTING OPERATION (APPLICATION)78
- 10.1 How to use SITE SETUP function (SITE SETUP page)79
- 10.2 Setting of data logger function91
- 10.3 Setting of system (SYSTEM SETUP screen)103
- 10.4 Setting of range (setting screen for input/output range)121
  - 10.4.1 Setting the input range: When setting the range for the input currentor input voltage.Setting range: 0.000 to ±9999999999121
  - 10.4.2 Setting the output range123
- 10.5 Use of printer function (PRINTER screen)127
- 10.6 Maintenance function (MAINTENANCE screen)132
- 10.7 Flow velocity distribution display function (optional)145
  - 10.7.1 Installing Detector145
  - 10.7.2 Operation150
- 10.8 Contents of errors in status display155
  - 10.8.1 How to check status display155
  - 10.8.2 Action on error156
11. MAINTENANCE AND CHECKUP159
12. ERROR AND REMEDY162
- 12.1 Error in LCD Display162
- 12.2 Error of key162
- 12.3 Error in measured value163
- 12.4 Error in analog output166
13. EXTERNAL COMMUNICATION SPECIFICATION167
14. HOW TO USE PRINTER168
- 14.1 How to connect printer168
- 14.2 How to load printer roll sheet170
15. REPLACEMENT OF BUILT-IN BATTERY171
16. APPENDIX173
- 16.1 Piping data173
- 16.2 Command tree180
- 16.3 Specifications182
- 16.4 Q & A187
- 16.5 File contents of SD memory card192

Related product manuals

Fuji Electric FSC-4

195 pages

Fuji Electric Time Delta-C FSV-2

Fuji Electric ZKJ Series

106 pages

Fuji Electric FSC-2 - Page 83

Table of Contents

Related product manuals