Fuji Electric FVR-E11S-7EN

5-10
o: Optional functions
Function code
Name Setting range
Min.
unit
Factory
setting
Change during
operation
RS485
Data
format
User setting
o00 Optional selection
0: Option inactive
1: Option active
Set 0 when optional card is not used.
- 0 0
Description of change during operation
: The data changed by the or key takes effect on the inverter operation. However, press the
key to store the new data.
: Press the or key to change the data. The new data takes effect after the key is pressed to
store the data.
X : The data can be changed only while the inverter is stopped.