To Next PageTo Next PageWhat to do if Fuji Electric FVR-C11S-7EN Inverter shows overcurrent while running at constant speed?
If your Fuji Electric Inverter displays an overcurrent error while operating at a constant speed, you should first eliminate any short-circuits or grounds. If the problem persists, try reducing the load or consider using an inverter with a larger capacity.
How to fix overcurrent during acceleration in Fuji Electric FVR-C11S-7EN Inverter?
To resolve an overcurrent issue during acceleration with your Fuji Electric Inverter, begin by checking for and removing any short-circuits or grounds. If the problem continues, reduce the load on the inverter or consider upgrading to an inverter with a greater capacity.
How to solve overcurrent during deceleration in Fuji Electric Inverter?
If you are experiencing overcurrent during deceleration with your Fuji Electric Inverter, the first step is to eliminate any short-circuits or grounds. If the issue remains, reduce the load or think about increasing the inverter capacity.
General| Brand | Fuji Electric |
|---|---|
| Model | FVR-C11S-7EN Series |
| Category | Inverter |
| Language | English |
Unpack and check the product as explained below.
Install this product at a place satisfying the conditions listed in Table 2-1-1.
Check the following before operation:
Names and functions of keypad panel components and keys.
F: Fundamental functions
When the protective function is activated, inverter output is instantly cut off.
Diagnose tripping by alarm display.
During the operation and conduction, the visual inspection for abnormal operation is executed from the outside...
Detailed specifications for inverter type, output ratings, and power supply.
There is an optional built-in card for RS485 serial communication.
General information on UL/cUL safety standards for the product.
General information on electromagnetic compatibility and compliance with EMC Directive.
