5-40
A11
Motor 2 (Capacity)
The capacity of motor 2. This parameter functions
in the same way as P02 "Motor 1 (Capacity)". For
the description, refer to P02 "Motor 1 (Capacity)".
However, the function of related motor data
changes to A12 "Motor 2 (Rated current)", A15
"Motor 2 (No-load current)", A16 "Motor 2 (%R1
setting)" and A17 "Motor 2 (%X setting)".
A12 Motor 2 (Rated current)
The rated current of motor 2. This parameter
functions in the same way as P03 "Motor 1 (Rated
current)". For the description, refer to P03 "Motor
1(Rated current)".
A13 Motor 2 (Tuning)
Tuning of motor 2. This parameter functions in the
same way as P04 "Motor 1 (Tuning)". For the
description, refer to P04 "Motor 1 (Tuning)".
A14 Motor 2 (Online turning)
Online tuning of motor 2. This parameter functions
in the same way as P05 "Motor 1 (Online tuning)".
For the description, refer to P05 "Motor 1 (Online
turning)".
A15 Motor 2 (No-load current)
The no-load current of motor 2. This parameter
functions in the same way as P06 "Motor 1
(No-load current)". For the description, refer to
P06 "Motor 1 (No-load current)".
A16 Motor 2 (%R1 setting)
A17 Motor 2 (%X setting)
%R1 and %X of motor 2. These parameters
function in the same way as P07 "Motor 1 (%R1
setting)" and P08 "Motor 1 (%X setting)". For the
description, refer to P07 and P08.
A18 Motor 2 (Slip compensation control 2)
The slip compensation control of motor 2. This
parameter functions in the same way as P09
"Motor 1 (Slip compensation control 1)". For the
description, refer to P09 "Motor 1 (Slip
compensation control 1)".
A19 Motor 2 (Slip compensation response
time 2)
Set the response time for slip compensation of
motor 2. This parameter functions in the same way
as P10 "Motor 1 (Slip compensation response
time)". For the description, refer to P10 "Motor 1
(Slip compensation response time)".
o: Optional functions
o00 Option selection
0: Option inactive
1: Option active
Set 0 when option card is used.
Refer to the instruction manual of option card
for detail of optional functions.
To Next Page
Loading...
