Fuji Electric MICREX-F Series

To Next Page

To Previous Page

MICREX-F Series SIO Driver

GP-Pro EX Device/PLC Connection Manual

 Setting of External Device

Perform the communication settings of the External Device in the default file. Create the default file in the data

table. Please refer to the manual of the External Device for the default file number or the setting method.

Setup Items Setup Description Notes

Transmission Procedure No procedure

Set by the initial file

Mode Settings

Baud rate 9600

Data Bit 7

Parity Bit Even

Stop Bit 2

DCE/DTE DCE

CTS/RTS Always ON

DSR/DTR Always ON

Send Condition None

PK Access Disabled

Transmission Code JIS

Code Conversion Enable

Head Code STX

End Code ETX

BCC None

Position TEXT

Formula Sum

Code Transmission Code

Fuji Electric MICREX-F Series - Page 23