Fuji Electric MICREX-F Series - Page 39

MICREX-F Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
39
2F)
• 1:1 Connection
Do not connect the FG terminal of CA3-CBL422-01 to the External Device.
* Turn On the termination resistance switch of the External Device, and set the operation mode to 3.
• 1:n Connection
Do not connect the FG terminal of CA3-CBL422-01 to the External Device.
*1 Turn ON the termination resistance switch on the External Device which terminates the RS422 connection.
*2 Set the operation mode on the External Device interface to 3.
External Device*
Display
CA3-CBL422-01
CA4-ADPONL-01
Signal name
RDA
RDB
SDA
SDB
SG
Signal name
SDA
SDB
RDA
RDB
SG
Display
External Device*2 External Device*1*2
Signal name
RDA
RDB
SDA
SDB
SG
Signal name
SDA
SDB
RDA
RDB
SG
Signal name
SDA
SDB
RDA
RDB
SG
FG
CA3-CBL422-01
CA4-ADPONL-01