37
FUZY control setting
[Description]
• This function is used to select or not
to select FUZY control.
• FUZY control provides the follow-
ing advantages.
· Quick start without causing over-
shoot
· Quick settlement in response to
external disturbance.
• Use this function after setting P.I.D
parameter to optimum value, using
auto-tuning, etc.
Example) Set FUZY control to ON.
Key operation Description
Press the SEL key for 3 seconds,
and P-n1 is displayed.
Press the SEL key repeatedly until
FUZY is displayed.
Press the or key to display
ON.
Press the DATA key. Current data
is displayed.
Press the SV key when you need to
display the operation status display.
After pressing the ENT key, the data
is registered.
Display
SEL
SEL
SV
DATA
ENT
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
