Fuji Electric TP-A1 - Page 22

3-9
ENGLISH
Table 3.5 Monitoring Items (Selectable when PID control or external PID control is enabled) (Continued)
Monitor names
Sub-
monitor
Unit Meaning of displayed value
HVAC/
AQUA
Ace
Function
code data
for K10,
E43
External PID control 3
command (Note 13)
E. SV3 J655
PID command and its feedback converted into
physical quantities of the object to be controlled.
The display unit can be selected with Function
code J655.
Y N 80
External PID control 3
feedback value
(Note 13)
E. PV3 J655 Y N 81
External PID control 3
output (Note 13)
E. MV3 %
External PID output in %, assuming the PID
output as 100%
Y N 82
External PID control 3
manual command
(Note 14)
E. MU3 %
External PID manual command in %, assuming
the manual command value as 100%
Y N 83
(Note 6) These items appear when J101 (PID control 1) or J201 (PID control 2)  0. The or appears
on the status icon field, indicating that the internal PID is selected.
(Note 7) These items appear when:
- J101 (PID control 1) or J201 (PID control 2)  0
- J101 or J104 (PID control 1)  0
(Note 8) These items appear when J501 (External PID control 1)  0.
(Note 9) This item appears when J501 (External PID control 1)  0 and %/EPID1 ("Cancel external PID
control 1") is assigned to any digital input terminal.
(Note 10) These items appear when J501 or J504 (External PID control 1)  0.
(Note 11) These items appear when J601 (External PID control 2)  0.
(Note 12) This item appears when J601 (External PID control 1)  0 and %/EPID2 ("Cancel external PID
control 2") is assigned to any digital input terminal.
(Note 13) These items appear when J651 (External PID control 3)  0.
(Note 14) This item appears when J651 (External PID control 3)  0 and %/EPID3 ("Cancel external PID
control 3") is assigned to any digital input terminal.