3-15
ENGLISH
Basic Screen Configuration
Main menu screen
Pressing the
key when the running mode screen is displayed will show the main menu screen.
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
← Hierarchy display +
scroll on/off
Use the and keys to choose the
desired menu item from the main menu screen.
Hierarchy display
The hierarchical structure for each screen is "Main menu" "Sub-menu" "Detailed menu" "Data revision
screen". Make each menu selection to move to the data revision screen.
Explanation of designation
In this manual, the menu transition of Programming mode Main menu item 1, "Start-up" Sub-menu item
3, "Date/Time" Detailed menu item 2, "Adjust" will be shown as
PRG > 1(Start-up) > 3(Date/Time) > 2(Adjust).
Menu types are shown in Table 3.7.
Table 3.7 Programming Mode Menus
Main
Menu
Sub-Menu
Hierarchy
Display
Principal Functions
FRENIC-AQUA
FRENIC-HVAC
FRENIC-Ace
0. Quick Setup: Shows only frequently used function codes.
— — PRG>0 Y Y Y
1. Start-up: Sets functions for initial settings.
1 Language PRG>1>1 Sets language to be displayed on LCD monitor. Y Y Y
2 Select application PRG>1>2
Allows individual initialization of function codes that
are grouped by application.
Y Y Y
3 Set clock PRG>1>3
Allows setting of date, time and daylight saving time.
Date and time display format can also be changed.
Y Y N
4 Set display PRG>1>4 Selects content to be displayed on LCD screen. Y Y Y
2. Function Code: Setting screens related to function codes, such as setting/copying function code
data.
1 Set data PRG>2>1 Allows function code data to be displayed/changed. Y Y Y
2 Confirm data PRG>2>2 Allows confirmation of function code settings. Y Y Y
3
Confirm revised
data
PRG>2>3
Allows confirmation of function code changes from
factory-default settings.
Y Y Y
4 Copy data PRG>2>4 Reads, writes and verifies function code data. Y Y Y
5
Timer for
scheduled
operation
PRG>2>5 Sets up the running conditions of scheduled operation. Y Y N
6 Initialize data PRG>2>6
Restores function code data values to factory default
settings.
Y Y Y
Shows main menu
To Next Page
Loading...