Loading Paper
65
Paper and Other Media
4
• If you do not load envelopes in the bypass tray right after they have been removed from the
packaging, they may bulge. To avoid jams, press firmly across the whole envelopes to flatten them
as shown below before loading the envelopes in the bypass tray.
Com 10, Monarch, or DL
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that
the flaps come at the right when you face towards the machine.
Note •When the envelope set in the above way is wrinkled after copying or printing, the wrinkles can be
suppressed by setting the envelope so that the flap comes at the left when you face towards the
machine. In this case, make sure to rotate the original 180 degrees to maintain the correct
orientation of the printed text and image.
C5
Load the envelopes short edge feed with the flaps open or closed and the print side up.
Ensure that the flaps come at the bottom with the flaps open or at the top with the flaps
closed when you face towards the machine.
To Next Page
Loading...
Need help?
General
