Replacing Toner Cartridges
71
Maintenance
5
Replacing Toner Cartridges
The following messages are displayed on the touch screen depending on the amount of
toner remaining. Replace the toner cartridge according to the message.
1 Turn the control panel to the left.
2 Make sure that the machine is not operating,
and open the front cover.
3 Grasp the handle on the toner cartridge to
replace, and then pull out the cartridge.
Important •Slide out the toner cartridge gently. Otherwise, toner may spill from the cartridge.
• If you have a used toner cartridge which is no longer needed, contact our Customer Support Center
for its disposal.
Note •"Y", "M", "C", or "K" indicates Yellow, Magenta, Cyan, and Black, respectively.
4 Unpack the new toner cartridge and shake it
five or six times to distribute the toner evenly.
Never throw a toner cartridge into an
open flame. Remaining toner in the
cartridge may catch fire and cause burn
injuries or explosion.
If you have a used toner cartridge no
longer needed, contact Fuji Xerox
Customer Support Center. for its take-
back.
To Next Page
Loading...
