System Settings
141
Tools
8
Tray 2 to 4
Sets each tray to be included in the automatic tray selection.
You can select [On] or [Off].
[On] is set at the time of factory shipment.
Note • [Tray 2] to [Tray 4] are displayed when the optional paper trays are mounted.
Paper Size Settings
Used to specify the size of paper to be automatically detected when you use standard sizes
of a document or the machine is set to detect sizes of a document.
You can select from [A/B Series (8K/16K)], [Inch Series (8 x 14")], [A/B Series (8 x 13")], or
[Inch Series (8 x 13.4")].
[A/B Series (8K/16K)] is set at the time of factory shipment.
Switch DADF Legal Size
Used to set the alternative document size that can be detected automatically in the
document feeder.
You can select from [8.5 x 13" ] or [8.5 x 14" ].
[8.5 x 14" ] is set at the time of factory shipment.
Switch 8K/16K Size
Used to set the alternative document size that can be detected automatically in the
document feeder.
You can select from [Chinese (8K/16K)] or [Taiwan (8K/16K)].
[Chinese (8K/16K)] is set at the time of factory shipment.
Consumables Settings
Show Toner Alert
Used to set how frequently to display messages on screen when it is close to the time to
replace the toner cartridge.
You can select from [Off], [At Startup], or [At Auto Clear].
[At Startup] is set at the time of factory shipment.
Show Drum Alert
Used to set how frequently to display messages on the screen when it is close to the time to
replace the drum cartridge.
You can select from [Off], [At Startup], or [At Auto Clear].
[At Startup] is set at the time of factory shipment.
Show Drum Warning
Used to set how frequently to display messages on the screen when the drum cartridge life
is ended.
You can select from [Off], [At Startup], or [At Auto Clear].
[At Auto Clear] is set at the time of factory shipment.
To Next Page
Loading...
Need help?
General
