Fuji Xerox DocuCentreS2520 User Manual

2 Environment Settings
38
Environment Settings
2
Setting the Send E-mail Function
SMTP Server Settings
Use the SMTP server to send an e-mail.
Use CentreWare Internet Services to set the SMTP server.
The items to be set are shown below.
Note • If you selected [None] for [Login Credentials for the Machine to access the SMTP Server to send
automated e-mails], you can leave the [Login Name], [Password] and [Retype Password] fields blank.
To make the settings:
1 Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.42).
2 Click the [Properties] tab.
Item Description
SMTP Server IP Address/Host
Name
Enter the SMTP server's IP address as an IPv4 or IPv6 address or in
FQDN format (up to 256 characters).
Port Number for sending
E-mail
Set the SMTP server's port No. (a value between 1 and 65535).
Login Credentials for the
Machine to access the SMTP
Server to send automated e-
mails
Select [None] or [SMTP AUTH] to indicate whether to perform
SMTP authentication when sending an e-mail.
Login Name Enter the SMTP server login name (between 1 and 64 ASCII code
characters).
Password Enter the authentication password for the SMTP server (between 1
and 64 ASCII code characters).
Retype Password Verify the SMTP server authentication password you entered by re-
entering it here.

Fuji Xerox DocuCentreS2520 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2520
Category	Printer
Language	English