Replacing Consumables
185
Maintenance
11
Note • If the left cover is not completely closed, an error code will appear and the machine will remain
paused.
12 Press the <Log In/Out> button.
13 Use the numeric keypad to enter the passcode, and then press the <OK> button.
Note • The passcode is initially set to "11111" (five "1" digits).
• The <Log In/Out> button lights up when the
machine is in System Administration mode.
14 Select [System Settings], and then press the
<OK> button.
15 Select [Other Settings], and then press the <OK>
button.
16 Select [Maintenance], and then press the <OK>
button.
17 Enter [950807] using the numeric keypad, and
then press the <Start> button.
1
2
45
78
0
[* * * * * ]
System Admin. Passcode
Network Settings
...
Copy Settings
...
Tools
System Settings
...
Region & Timer Settings
...
Other Settings
...
System Settings
Consumables Settings
...
Job History Verbose
...
Off
Maintenance
...
Other Settings
System Admin. Passcode
...
Maintenance
...
Maintenance
[950807]
1
23
456
789
0#
C
To Next Page
Loading...
Need help?
General
