114 Troubleshooting
Clearing Paper Jams From the Rear of the Printer
IMPORTANT:
• To prevent electric shock, always turn off the printer and disconnect the power cord from the grounded outlet before
performing maintenance.
• To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes extremely hot during use.
NOTE:
• To resolve the error displayed on the operator panel, you must clear all print media from the print media path.
1 Push the rear cover handle and open the rear cover.
2 Lift up the levers.
3 Remove any paper jammed from the rear of the printer by carefully pulling it in the direction of the arrow shown
in the following illustration.
To Next Page
Loading...
Need help?
General
