Maintenance 155
Checking Page Counts
The total number of printed pages can be checked at the Printer Setting Utility. Four meters are available:
The Meter Readings counts the number of pages printed properly. Single side color print (including Multiple-Up) is
counted as one job, and 2-sided print (including Multiple-Up) is counted as two. During 2-sided printing, if an error
occurs after one side is printed properly, it is counted as one.
When printing color data, which has been converted by using ICC profile on an application, with the Color setting,
the data is printed by color even if it seems to be black and white data on the monitor. In that case, Meter 1 and
Meter 4 are increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of the
application. In this case, the blank page is counted as one page. However, when doing 2-sided printing for odd
number of pages, the blank page inserted to the back side of the last odd page is not counted.
The following procedure uses Windows 7 as an example.
To check a meter at the Printer Setting Utility:
1 Click Start All Programs Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific your printer
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2 Click the Printer Settings Report tab.
3 Select Menu Settings from the list at the left side of the page.
The Menu Settings page is displayed.
4 Check the number of pages under Meter Readings.
Meter 1 Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3 Displays the total number of large size color prints.
Meter 4 Displays the total number of color and monochrome prints (Meter 1 + Meter 2).
To Next Page
Loading...
Need help?
General
