Printer Connection and Software Installation 49
WSD (Web Services on Devices) Printer Setup
You can install your new printer on the network using Windows Add Printer wizard. When installing using the
Software Pack CD-ROM that shipped with your printer, see "Using Installer to Set Up Connection and Install
Software" on page 38.
• Installing a Print Driver Using the Add Printer Wizard
1 For Windows 7 and Windows Server 2008 R2, click Start Devices and Printers.
For Windows Vista, click Start Control Panel Hardware and Sound Printers.
For Windows Server 2008, click Start Control Panel Printer.
For Windows 8 and Windows 8.1, on the Desktop screen, place the mouse pointer in the upper right corner of
the screen and move the mouse down, and then select Settings. Click Control Panel Hardware and
Sound Devices and Printers.
For Windows Server 2012 and Windows Server 2012 R2, on the Desktop screen, place the mouse pointer in
the upper right corner of the screen and move the mouse down, and then select Settings. Click Control Panel
Hardware Devices and Printers.
2 Click Add a printer to launch the Add Printer Wizard.
For Windows 8, Windows 8.1, Windows Server 2012, and Windows Server 2012 R2, go to step 4.
3 Select Add a network, wireless or Bluetooth printer.
4 In the list of available printers, select the one you want to use, and then click Next.
NOTE:
• In the list of available printers, the WSD (Web Services on Devices) printer is displayed in the form of http://IP
address/[UUID].
• If no WSD (Web Services on Devices) printer is displayed in the list, enter the printer's IP address manually to create a
WSD (Web Services on Devices) printer. To enter the printer's IP address manually, follow the instructions below.
To create a WSD (Web Services on Devices) printer, you must be a member of Administrators group.
1 Click The printer that I want isn't listed.
2 Select Add a printer using a TCP/IP address or hostname and click Next.
3 Select Web Services Device from Device type.
4 Enter the printer's IP address in the Hostname or IP address text box and click Next.
• Before installing the driver using the Add Printer wizard on Windows Server 2008 R2, add the print driver to your
computer.
5 If prompted, install the print driver on your computer. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.
6 Complete the additional steps in the wizard, and then click Finish.
7 Print a test page to verify printer installation.
a Open the Devices and Printers or Printers folder by performing step 1.
b Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista
and Windows Server 2008).
c On the General tab, click Print Test Page. When a test page is printed successfully, the installation is
complete.
To Next Page
Loading...
Need help?
General
