76 Printing Basics
Loading Envelope in the Multipurpose Feeder
NOTE:
• When you print on envelopes, be sure to specify the envelope setting on the print driver. If not specified, the print image will be
rotated 180 degrees.
• When Loading Com 10, DL, or Monarch
Load envelopes with the flaps closed. Place the print side facing up, and the flaps come at the right when you face
towards the printer.
To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the flaps opened. Place
the print side facing up, and the flaps come at the bottom when you face towards the printer.
NOTE:
• When you load the envelopes in the long-edge feed (LEF) orientation, be sure to specify the landscape orientation on the print
driver.
• When Loading C5
Load envelopes with the flaps opened. Place the print side facing up, and the flaps come at the bottom when you
face towards the printer.
IMPORTANT:
• Never use envelopes with windows, or coated linings. These lead to paper jams and can cause damage to the printer.
To Next Page
Loading...
Need help?
General
