Using the Operator Panel Menus 168
• Wireless Setup (DocuPrint CP205 w Only)
Purpose:
To configure the wireless network interface.
Values:
Manual Setup Enter (SSID) Specify a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.
Infrastructure Select when you configure the wireless setting through the access
point such as a wireless router.
No Security Specify No Security to configure the wireless
setting without specifying a security method from
WEP, WPA-PSK-TKIP, and WPA2-PSK-AES.
WEP(64Bit) Specify the WEP 64bit Key to use through the
wireless network. Enter 10 hexadecimal characters.
Transmit Key Specify the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4.
WEP(128Bit) Specify the WEP 128bit Key to use through the
wireless network. Enter 26 hexadecimal characters.
Transmit Key Specify the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4.
WPA-PSK-
TKIP
Select to configure the wireless setting with the
security method of WPA-PSK-TKIP.
PassPhraseEn
try
Specify the pass phrase of
alphanumeric characters from 8
to 63 only when WPA-PSK-TKIP
is selected for Encryption Type.
WPA2-PSK-
AES
Select to configure the wireless setting with the
security method of WPA2-PSK-AES.
PassPhraseEn
try
Specify the pass phrase of
alphanumeric characters from 8
to 63 only when WPA2-PSK-AES
is selected for Encryption Type.
Ad-hoc Select to configure the wireless setting without the access point such
as a wireless router.
No Security Specify No Security to configure the wireless
setting without specifying the security method from
WEP.
WEP(64Bit) Specify the WEP 64bit Key to use through the
wireless network. Enter 10 hexadecimal characters.
Transmit Key Specify the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4.
WEP(128Bit) Specify the WEP 128bit Key to use through the
wireless network. Enter 26 hexadecimal characters.
Transmit Key Specify the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4
.
To Next Page
Loading...
Need help?
General
