Fuji Xerox DocuPrint M225 z

DocuPrint M225 dw
1 2 3 4 5
1. Power On/Off
•
Turn on the machine by pressing
.
•
Turn off the machine by pressing and holding
. The LCD displays Shutting Down
and stays on for a few seconds before turning of
f.
2. Copy buttons
Options
Press to access temporary settings for copying.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
Two functions are assigned to one button on some models.
3. Scan
Press to switch the machine to Scan Mode.
4.
WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-
screen instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Fuji Xerox machine is connected to a wireless access point.
When the WiFi light blinks, the wireless connection is down, or your machine is in the process
of connecting to a wireless access point.
1
General Information
5