124
Home > Scan > Scan Using the Scan Button on Your Fuji Xerox Machine > Scan to Network (Windows
®
) >
Set up a Scan to Network Profile > Set the Date and Time Using Web Based Management
Set the Date and Time Using Web Based Management
Make sure the date and time and the time zone settings are set correctly using Web Based Management or the
control panel, so the machine's time matches the time being used by the server providing authentication.
1.
Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.0.2.1
Type a password, and then click . The default password is "x-admin". To ensure security, it is important you
change the password.
2.
Click the Administrator tab.
3.
Click the Date&Time menu in the left navigation bar.
4.
In the Date fields, enter the date.
5.
Select the clock type from the Clock Type field (available only for some countries).
6.
In the Time fields, enter the time.
7.
Select the time difference between your location and UTC from the Time Zone drop-down list, for example, the
time zone for Eastern time in the USA and Canada is UTC-05:00.
8.
In the Auto Daylight field, click On to set the machine to change automatically for Daylight Saving Time. It will
reset itself forward one hour in the spring, and back one hour in the autumn (available only for some countries).
9.
Click Submit.
• Set up a Scan to Network Profile
Ignore step 1, if you already have a Web Based Management window open.
To Next Page
Loading...
Need help?
General
