Fuji Xerox DocuPrint M375 z - Change the Check Paper Size Setting

46
Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting
Change the Check Paper Size Setting
When you turn on your machine's Check Size setting, the machine displays a message when you remove a paper
tray or load paper using the MP tray, asking if you changed the paper size and paper type.
The default setting is On.
1. Press [Settings] > [All Settings] > [General Setup] > [Tray Setting] > [Check Size].
2. Press [On] or [Off].
3. Press .
Related Information
• Paper Settings