222
Home > Fax > Receive a Fax > Receive Mode Settings > Set the 2-sided Printing for Received Faxes
Set the 2-sided Printing for Received Faxes
Your machine prints received faxes on both sides of the paper when [2-sided] is set to [On].
1.
Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [2-sided].
2.
Press [On] or [Off].
3.
Press .
• Receive Mode Settings
• (For Australia and New Zealand) Use A4 size paper (60 to 105 g/m
2
) for this function.
• (For Other countries) Use A4, Letter, Legal, Folio, Mexico Legal or India Legal size paper for this function (60
to 105 g/m
2
). Make sure the 2-sided tray is set to the correct paper size. If it is not, the paper may not be fed
correctly, resulting in a skewed printout or a paper jam.
• When 2-sided printing is enabled, incoming faxes are automatically reduced to fit the paper in the paper tray.
To Next Page
Loading...
Need help?
General
