330
Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use
Wi-Fi Direct
®
> Configure Your Wi-Fi Direct Network > Wi-Fi Direct Network Configuration Overview
Wi-Fi Direct Network Configuration Overview
The following instructions offer five methods for configuring your Fuji Xerox machine in a wireless network
environment. Select the method you prefer for your environment.
Check your mobile device for configuration.
1.
Does your mobile device support Wi-Fi Direct?
2.
Does your mobile device support one-push configuration for Wi-Fi Direct?
3.
Does your mobile device support Wi-Fi Protected Setup
™
(WPS)?
4.
Does your mobile device support one-push configuration for Wi-Fi Protected Setup
™
(WPS)?
To use Fuji Xerox iPrint&Scan functionality in a Wi-Fi Direct network configured by one-push configuration using
Wi-Fi Direct or by PIN Method configuration using Wi-Fi Direct, the device you use to configure Wi-Fi Direct must
be running Android™ 4.0 or greater.
Related Models: DocuPrint M385 z/DocuPrint M375 z
Option Description
Yes Go to Step 2
No Go to Step 3
Option Description
Yes See Related Information: Configure Your Wi-Fi Direct Network Using the One-Push
Method.
No See Related Information: Configure Your Wi-Fi Direct Network Using the PIN
Method.
Option Description
Yes Go to Step 4
No See Related Information: Configure Your Wi-Fi Direct Network Manually.
Option Description
Yes See Related Information: Configure Your Wi-Fi Direct Network Using the One-Push
Method of Wi-Fi Protected Setup
™
(WPS).
No See Related Information: Configure Your Wi-Fi Direct Network Using the PIN
Method of Wi-Fi Protected Setup
™
(WPS).
To Next Page
Loading...
