396
Home > Security > Network Security Features > Use Active Directory
®
Authentication > Configure Active
Directory
®
Authentication Using Web Based Management
Configure Active Directory
®
Authentication Using Web Based
Management
1.
Start your web browser.
2.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.0.2.1
3.
Type a password, and then click . The default password is "x-admin". To ensure security, it is important you
change the password.
4.
Click the Administrator tab.
5.
Click the User Restriction Function menu in the left navigation bar.
6.
Select Active Directory Authentication.
7.
Click Submit.
8.
Select Active Directory Authentication in the left navigation bar.
9.
Configure the following settings:
10.
Click Submit.
Active Directory
®
authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
Option Description
Storage PC Print Data Select this option to store incoming print data. After you log on to the machine,
your PC print jobs will be printed automatically. This feature is available only for
print data created by a Fuji Xerox native printer driver.
Storage Fax RX Data Select this option to store incoming fax data. You can print all incoming fax
data after you log on to the machine.
Remember User ID Select this option to save your User ID.
Active Directory Server
Address
Type the IP address or the server name (for example: ad.example.com) of the
Active Directory
®
Server.
Active Directory Domain
Name
Type the Active Directory
®
domain name.
Protocol & Authentication
Method
Select the protocol and authentication method.
Get Mail Address
(DocuPrint M385 z/
DocuPrint M375 z)
Select this option to obtain logged on user's email address from the LDAP
server. (available only for LDAP + kerberos authentication method)
Get User's Home Directory Select this option to obtain your home directory as the Scan to Network
destination. (available only for LDAP + kerberos authentication method)
LDAP Server Port Type the LDAP server port number (available only for LDAP + kerberos
authentication method).
LDAP Search Root Type the LDAP search root (available only for LDAP + kerberos
authentication method).