40
Home > Paper Handling > Load Paper > Load and Print Using the Multi-purpose Tray (MP Tray) > Load and
Print on Envelopes Using the MP Tray
Load and Print on Envelopes Using the MP Tray
1.
Open the machine's back cover (the face up output tray).
2.
Open the paper stopper (Available only for certain models).
3.
On the front of the machine, open the MP tray and lower it gently.
4.
Pull out the MP tray support (1) and unfold the flap (2).
• You can load up to ten envelopes in the MP tray.
• Before loading, press the corners and sides of the envelopes to make them as flat as possible.
• When you load a different size and type of paper in the tray, you must change the Paper Size and Paper
Type settings in the machine or on your computer, also.
To Next Page
Loading...
