180 Using the Operator Panel Menus
• Line Termination
Purpose:
To add the line termination commands.
Values:
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript
Level3 Compatible printer language.
• PS Error Report
Purpose:
To specify whether to print the description of errors concerning the PostScript Level3 Compatible
printer language.
Values:
• PS Job Timeout
Purpose:
To specify the runtime of a single job using the PostScript Level3 Compatible printer language.
Values:
Off* The line termination command is not added.
CR=CR, LF=LF, FF=FF
Carriage Return The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
Line Feed The LF command is added.
CR=CR-LF, LF=LF, FF=FF
CR + LF The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
* Factory default menu setting
Off Dose not print the PS error report.
On* Prints the PS error report.
* Factory default menu setting
Off* Does not set the runtime of a PS job.
On 1min Sets the runtime of a PS job.
1min - 900min
* Factory default menu setting
To Next Page
Loading...
Need help?
General
