Printer Connection and Software Installation 73
14 Print the System Settings page using the operator panel.
See "Printing the System Settings Page" on page 156.
15 Confirm that "Link Quality" is shown as "Good", "Acceptable", or "Low" on the report.
NOTE:
• When "Link Quality" is shown as "No Reception", check if the wireless network settings are correctly
configured. To reconfigure the wireless network settings, click Return.
16 Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
17 If you agree to the terms of the License Agreement, click I accept the terms of the license
agreement to continue the installation process, and then click Next.
18 Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
NOTE:
• If the printer to be installed is not listed in the Select Printer screen, try the following steps:
- Click Refresh to update the information.
- Click Add Printer, and then enter the details of the printer manually.
19 Configure the required items on the Enter Printer Settings screen, and then click Next.
20 Select the software to be installed, and then click Install.
21 Click Finish to exit this tool.
The wireless configuration is complete.
To Next Page
Loading...
Need help?
General
