FujiFilm FCR 5000 - 11.7 5. UNIT: 3. SIDE-POSITIONING GRIP: Operation Tests on Side-Positioning Mechanism Grip

CR-IR341 Service Manual MU - 101
009-051-05
11.20.99 FM2638
MU - 101
12 13 14 1511 16 17
C ONTENTS
11.7 5. UNIT: 3. SIDE-POSITIONING GRIP: Operation Tests on
Side-Positioning Mechanism Grip
■ 1. HOME POSITION: To Locate HP of Side-Positioning Mechanism Grip
Execute “1. HOME POSITION”.
➮ The following message appears.
MOVED TOWARD THE HOME POSITION IS IN PROGRESS.
RESULT - OK (or RESULT - ERROR)
Meaning: Side-positioning mechanism grip home positioning is now being performed.
■ 2. GRIP: To Effect Grip Operation for Side-Positioning Mechanism
Execute “2. GRIP”.
➮ Once it is executed normally, the following message appears.
MOVED TOWARD THE NIPPING POSITION IS IN PROGRESS.
RESULT - OK
Meaning: Grip operation of the side-positioning mechanism is now being performed.
➮ If it ends in error, “ERROR (XXXX)” appears. “XXXX” denotes an error code.
■ 3. RELEASE: To Perform Grip Release Operation for Side-Positioning Mechanism
Execute “3. RELEASE”.
➮ The following message appears.
MOVED TOWARD THE NON-NIPPING POSITION IS IN PROGRESS.
RESULT - OK (or RESULT - ERROR)
Meaning: Grip release operation of the side-positioning mechanism is now being
performed.