To Next PageTo Next PageWhy the LCD monitor darkens after taking a picture on FujiFilm FINEPIX A400?
If the LCD monitor on your FujiFilm Digital Camera darkens after taking a picture, it might be because you took pictures with flash. Wait a short time.
Why the TV image is black and white from FujiFilm FINEPIX A400?
If the TV image from your FujiFilm Digital Camera is black and white, the video output setting may be incorrect. Change the setting to NTSC or PAL.
What to do if PC does not recognize FujiFilm FINEPIX A400?
If your PC does not recognize the FujiFilm Digital Camera, the USB cable (mini-B) may not be correctly connected to the PC or camera. Set up the camera and connect the USB cable (mini-B) correctly.
What to do if erasing FRAME does not erase the frame on FujiFilm FINEPIX A400?
If erasing a FRAME does not work on your FujiFilm Digital Camera, some frames may be protected. Unprotect frames using the camera on which the protection was first applied.
General| Image Sensor | 1/2.5-inch CCD |
|---|---|
| Sensor Type | CCD |
| Optical Zoom | 3x |
| Lens | Fujinon |
| Focal Length | 6.3 - 18.9 mm |
| Storage Media | xD-Picture Card |
| Battery | 2 x AA batteries |
| Camera Type | Compact |
| LCD Screen Size | 1.5 inches |
| LCD Pixels | 60, 000 pixels |
| Shutter Speed | 1/2000 - 1 sec |
| ISO Sensitivity | Auto, 100, 200, 400 |
| Video Recording | 320 x 240 pixels, 10 fps |
