Why are my prints from FujiFilm instax square Link Printer white?
If some or all of the finished prints from your FujiFilm Printer are white, do not open the film door until you have used all of the exposures on your INSTAX instant film pack; otherwise, the remainder of the film will become exposed and turn white. Exposed instant film cannot be used to print INSTAX images.
What to do if my FujiFilm Printer does not function normally?
If your FujiFilm printer isn't working correctly, it might have a temporary malfunction. Try pressing the reset button. Also, ensure the printer is adequately charged.
What to do if the FujiFilm Printer film does not print?
If the film doesn't print, it might be misaligned due to vibration or dropping. Try loading a new film pack. If the film is jammed, turn the printer off and then on again. If the problem continues, remove the jammed film and load a new one.
Why FujiFilm instax square Link charging does not start?
If charging doesn't start on your FujiFilm printer, check that the USB power adapter plug is properly connected to the power outlet.
How to load film pack in FujiFilm instax square Link correctly?
To load the film pack correctly in your FujiFilm printer: - Use FUJIFILM instax SQUARE Instant Film, as other films are not compatible. - Align the yellow mark on the film pack with the yellow alignment marker on the printer body before loading.
Why are FujiFilm Printer prints white?
If your FujiFilm prints are coming out white, it's likely because the film door was opened before all the film was used. Do not open the film door until all the film has been used up. Opening the film door with film remaining will expose the film, causing it to become white.
What to do if my FujiFilm instax square Link Printer does not work properly?
If your FujiFilm Printer does not work properly, it might be due to a temporary malfunction. To resolve this, press the reset button. Alternatively, the battery may be low, so try charging the printer.
What to do if FujiFilm Printer power cut off during use?
If the power cuts off during use with your FujiFilm printer, please charge the printer.
How to load film in FujiFilm instax square Link Printer?
If the film pack does not load or does not load smoothly in your FujiFilm Printer: - Use only FUJIFILM INSTAX SQUARE instant print film (INSTAX MINI or INSTAX WIDE instant print film cannot be used). - Align the yellow mark on the film pack with the printer alignment mark (yellow) and load it in accordance with the loading instructions above and on the film pack.
Why is my FujiFilm Printer not charging?
If charging of your FujiFilm Printer does not start, ensure that the USB power adapter plug is properly connected to the power outlet.
General| Duplex printing | No |
|---|---|
| Print technology | Thermal |
| Maximum resolution | 800 x 800 DPI |
| Borderless printing | - |
| Time to first page (color, normal) | 12 s |
| Color name | Midnight Green |
| Control type | Buttons |
| Product color | Green |
| Market positioning | Home & office |
| Maximum print size | 2.4\ |
| USB connector | USB Type-C |
| Direct printing | Yes |
| Power source | Battery |
| Charging time | 2 h |
| Power consumption (printing) | 3 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | CE, Federal Communications Commission (FCC), UKCA |
Weight and Dimensions| Depth | 37.5 mm |
|---|---|
| Width | 105 mm |
| Height | 127.5 mm |
To Next Page
