How to fix a FujiFilm Revoria Press EC1100 that is not powering on?
If your FujiFilm Printer isn't powering on, the power cord might be loose. First, switch the printer off. Then, check that the power cord is securely connected to both the printer and the power outlet. Finally, switch the printer back on. Also, ensure the printer is connected to a power outlet that provides the correct voltage and current.
What to do if my FujiFilm Revoria Press EC1100 is unable to print?
If your FujiFilm Printer is unable to print, it could be due to a couple of reasons. First, if the printer has been off for a while, just woke up from sleep mode, or is processing many documents, it might take some time to adjust the image quality before printing starts. Also, ensure that the paper loaded matches the size specified in the Media Library Manager. If not, load the correct paper size and try printing again.
Why is the display blank on my FujiFilm Revoria Press EC1100?
If the display on your FujiFilm Printer is blank, the printer may be in Power Saver Mode. To exit this mode, simply press the Power/Power Saver button on the Control Panel.
How to troubleshoot a FujiFilm Printer making odd noises?
If your FujiFilm Printer is making odd noises, try these solutions: 1. Make sure the printer is installed on a level and sturdy surface. 2. Ensure all trays are firmly pushed into the machine. 3. There might be a foreign object inside the printer. Turn the printer off and carefully remove any foreign objects. If you can't remove the object without taking the printer apart, contact your local representative.
Why doesn't my FujiFilm Revoria Press EC1100 switch to Power Saver Mode?
Your FujiFilm Printer might not switch to the Low Power Mode or Sleep Mode if: you're using the Control Panel; a message is displayed about replacing supplies; the printer needs you to fix paper jams or open covers; there's an error due to a machine failure; or the printer is preventing condensation because Warmer Mode is on.
What to do if condensation has formed in my FujiFilm Revoria Press EC1100 Printer?
If condensation has formed in your FujiFilm Printer, set the Sleep Mode trigger time to more than 60 minutes using the control panel, and then allow the machine to stand with its power on for 60 minutes. Before using the printer, ensure that no water droplets are present inside the machine on parts like rollers or metal components. To prevent frequent condensation, keep the printer powered on by selecting > [Device] > [System Settings] > [System Clock / Timers] > [Warmer Mode] > [On] on the Control Panel.
General| Color Capability | Full color |
|---|---|
| Monthly Duty Cycle | Up to 300, 000 pages |
| Operating Systems | Windows, macOS, Linux |
| Print Technology | Electrophotography |
| Media Weight | 52-300 gsm |
| Supported Media Sizes | A3, A4, A5, B4, B5, Custom sizes |
| Supported Media Types | Coated paper, Uncoated paper, Synthetic paper, Labels |
| Power Requirements | 200-240 V, 50/60 Hz |
| Interface | Ethernet |
| Finishing Options | Stapling, Hole punching, Folding, Booklet making |
To Next Page
