Settings in BIOS Setup Utility
66 10600690568, edition 1
Operating BIOS Setup Utility
i
Press the F1 key to display help on the operation of BIOS Setup Utility.
The description of the individual settings is shown in the right-hand window of the BIOS
Setup Utility.
► Select the menu in which you want to make settings with the cursor keys.
► Press the Enter key.
The menu is displayed on the screen.
► Use the cursor keys to select the option you wish to change.
► Change the option with the keys PgUp or PgDn .
► Press the Enter key to confirm your selection.
► Press the Esc key to exit the selected menu.
► For future reference, make a note of the changes you have made (for example, in this manual).
Exiting BIOS Setup Utility
To exit BIOS Setup Utility, select the Exit menu from the menu bar. You can then decide which
settings you want to save. The Exit menu offers the following options.
You must mark the required option and activate it with the Enter key.
Exit Saving Changes
Select Exit Saving Changes and Yes to save the current settings and exit the BIOS Setup Utility. The
device is rebooted and the new settings come into effect.
Exit Discarding Changes
Select Exit Discarding Changes and Yes to discard the changes you have made. The settings which
were in force when BIOS Setup Utility was called remain effective. BIOS Setup Utility is terminated and
the device is rebooted.
Load Setup Default
To revert all the menus of BIOS Setup Utility to the default entries, select Load Setup Default and Yes.
Discard Changes
To load the values of all the menus of BIOS Setup Utility that were in effect when BIOS Setup Utility
was called, select Discard Changes and Yes. If you want to exit BIOS Setup Utility with these settings,
select Exit Saving Changes and Yes.
Save Changes
To save settings without exiting BIOS Setup Utility, select Save Changes and Yes.
To Next Page
Loading...
Need help?
General
