Settings with switches and jumpers
18 - English A26361-D2000-Z120-1-7419, edition 3
Skipping system and BIOS Setup password - switch 1 / pin pair 1 / pin pair A
Switch 1 / pin pair 1 / pin pair A enables skipping the system and BIOS Setup password.
Inserted System and BIOS Setup password are skipped when the device is switched on and
may be changed.
Not inserted System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - switch 2 / pin pair 2/ pin pair B
Switch 2 / pin pair 2 / pin pair B enables recovery of the old system BIOS after an attempt to update
has failed. To restore the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
Inserted The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
Diskette" restores the System BIOS on the mainboard.
Not inserted Normal operation (default setting).
Reserved - switch 3 and switch 4 (if present)
Switch 3 and 4 are reserved. The position of the switch doesn't matter.
To Next Page
Loading...
