Preparation for use and operation PC Cards
30 A26391-K96-Z100-2-7619
Installing a PC card
Ê Insert the PC card, contacts first, into the
lower slot guide. The labeled side of the
PC card must be facing upward.
Ê Gently push the PC card into the slot until
you feel it click into place.
i
Consult the documentation supplied with the PC card for information on how to install the
necessary device drivers.
For further information refer to the information files (e.g. *.TXT, *.DOC, *.WRI,or*.HLP)
provided on the PC card driver diskette or the information in the Windows 9x manual.
You can push the PC card slot eject button into the notebook casing. Fold back the eject
button to the rear.
Removing a PC card
2
1
Ê Fold out the eject button.
Ê Push the eject button (1).
Ê Slide the PC card out of the notebook (2).
To Next Page
Loading...
Need help?
General
