Fujitsu Siemens Computers SCENICVIEW B17-3 User Manual

SCENICVIEW B17-3/B19-3/P19-3
Adjusting size and position
Calling the
Image adjust setting window
H-Position
Adjusting the horizontal position
With this function you move the picture to the left or to the right.
V-Position
Adjusting the vertical position
With this function you move the picture up or down.
Clock
Setting synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
Phase
Eliminating picture interference
With this function you fine-tune your monitor to eliminate picture interference.
Adjusting the volume
Calling the
Audio setting window
Setting the volume for playback with the integrated loudspeakers
Volume
Switching the loudspeakers off or on
Mute
Setting colour temperature and colours
Calling the
Colour setting window
Selecting the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The colour
temperature is measured in K (= Kelvin). You can select from
sRGB, 6500 K,
9300 K, Native and Custom Colour.
sRGB
Native
Custom Colour
= setting colour display according to the sRGB standard
= Original colour of the LCD display
= User-defined colours
In the user-defined setting you can change the colour ratios of the basic colours
(red, green, blue) as required.
A26361-K1143-Z120-1-7619, edition 3 21

Fujitsu Siemens Computers SCENICVIEW B17-3 Specifications

General

Brand	Fujitsu Siemens Computers
Model	SCENICVIEW B17-3
Category	Monitor
Language	English