◆
How to operate the CD player
First press the [SOURCE] button to switch to the disc mode.
It is assumed here that a CD has already been loaded into
the unit.
■ Listening to CDs
1 .
Press the [SOURCE] button.
This starts CD play.
If an external CD changer is connected, each additional
tap of the [ BND ] button will switch modes from CD
changer 1
→ CD changer 2 → CD player.
A changer or player with no discs loaded will be
skipped.
●
Caution
●
•Playback may be intermittent when there is a scratch on a
CD or when the recorded side is dirty.
•Only two external CD changers may be connected.
To Next Page
Loading...