Fujitsu ADUH09LUAS1 Service Manual

¢ DIP switch setting
• SW101-Switch 1: Drainage function setting
Switch 1 Drainage function Factory setting
ON Disabled
OFF Enabled ♦
• SW101-Switch 2: Auto louver grille setting
→hen Auto louver grille kit (optional parts) is attached, set to “Enabled”.
Switch 2 Auto louver grille setting Factory setting
ON Enabled
OFF Disabled ♦
• SW101-Switch 3: Fan delay setting
→hen the indoor unit is stopped while operating in conjunction with auxiliary heater, the indoor
unit fan operation will continue for 1 minute.
Switch 3 Fan delay Factory setting
ON Enabled
OFF Disabled ♦
1-1. Function settings on indoor unit - (05-2) - 1. Function settings
FIELD WORKING FIELD WORKING

Fujitsu ADUH09LUAS1 Specifications

General

Brand	Fujitsu
Model	ADUH09LUAS1
Category	Air Conditioner
Language	English