Fujitsu AO G12KBTB Series Design & Technical Manual

9. Function settings
To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.
9-1. Function settings on indoor unit
By using some components on the PCB, you can change the function settings.
Related components on the PCB and the applicable settings
Component Setting content
DIP switch
SW100
1
Remote controller address setting
2
3
4
SW101
1 Drainage function setting
2 Setting change prohibited
3 Fan delay setting
 Component location
Components on the indoor unit main PCB used for the function settings are located as shown in
the following figure.
SW100
1 2 3 4
SW101
1 2 3
- 36 -
9-1. Function settings on indoor unit
9. Function settings
DUCT TYPE ARXG12-22KHTAP DUCT TYPE ARXG12-22KHTAP

Fujitsu AO G12KBTB Series Specifications

General

Brand	Fujitsu
Model	AO G12KBTB Series
Category	Air Conditioner
Language	English