To Next Page

To Previous Page

Contents of function setting

Each function setting listed in this section is adjustable in accordance with the installation environ-

ment.

NOTE: Setting will not be changed if invalid numbers or setting values are selected.



Function setting list

Function no. Functions

1) 11 Filter sign

2) 30/31 Room temperature control for indoor unit sensor

3) 40 Auto restart

4) 44 Remote controller custom code

5) 95 Heat insulation condition (building insulation)

1) Filter sign

Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated

amount of dust in the air of the room.

If the indication is not required, select "No indication" (03).

Function number Setting value Setting description Factory setting

00 Standard (400 hours)

01 Long interval (1,000 hours)

02 Short interval (200 hours)

03 No indication ♦

- 20 -

9-1. Function settings by using remote controller

9. Function settings

WALL MOUNTED

ASU9-12RL2

WALL MOUNTED

ASU9-12RL2

Fujitsu AOU12RL2 Design & Technical Manual

Other manuals for Fujitsu AOU12RL2