Fujitsu AOU18RLXFZH - Page 101

- 95 -
MULTI TYPE 2-3 rooms type
 Circuit diagram example
• When function setting is "Operation/Stop" mode
• When function setting is "Forced stop" mode
• Contact capacity: DC 24 V or more, 10 mA or more.
• *1: PCB of Communication kit is used for wall mounted
(ASU7RLF1, ASU9RLF1, and ASU12RLF1) type.
• *2: Make the distance from the PCB to the connected unit
within 33 ft (10 m).
• Use non-polar relays and switches.
Indoor unit type
1-pin 3-pin
(Polarity) (Polarity)
Compact cassette - +
Slim duct - +
Wall mounted
ASU7RLF1, ASU9RLF1, ASU12RLF1, ASU15RLF1
ASU18RLF
-+
Floor AGU9RLF, AGU12RLF, AGU15RLF - +
Indoor unit
control PCB*1
Example: Switch
Locally purchased
Connected unit
1
3
Signal
Connector
33 ft. (10 m)*2
Operation
Stop
On
Off
Input signal
Indoor unit
Remote controller
On On On
Input signal
Indoor unit
Command
Remote control
operation invalidity
On
Off
Operation
Stop
Forced stop
Normal