- 26 -
MULTI TYPE
2-3 rooms type
Pattern C
1. Modify the remote controller cable as follows:
• Use a tool to cut off the terminal on the end of the remote controller cable and then remove
the insulation from the cut end of the cable as shown in following figure.
• Connect the remote controller cable and connecting cable as shown in following figure.
• Be sure to insulate the connection between the cables.
2. Connect the remote controller cable.
• Connect the cable made in step 1. to the indoor unit PCB.
Wiring specifications
Optional parts
The communication kit is needed for connecting the wired remote controller to the compact wall
mounted type.
Use Cable size Wire type Remarks
Remote controller cable
22AWG (0.33 mm
2
)
Polar 3 core Use sheathed PVC cable.
Wall mounted Model name
ASU7/9/12/15RLF1 UTY-XCBXZ2
To Next Page
Loading...
