Fujitsu AOU18RLXFZH - 12-2.External Output

- 97 -
MULTI TYPE 2-3 rooms type
12-2. External output
Use an external output cable with appropriate external dimension, depending on the number of ca-
bles to be installed.
 Operation status output
Air conditioner operation status signal can be output.
 Circuit diagram example
• *1: PCB of Communication kit is used for wall mounted type(ASU7RLF1, ASU9RLF1,
ASU12RLF1, and ASU15RLF1).
• *2: Make the distance from the PCB to the connected unit within 33 ft (10 m).
• Relay spec: Max. DC 24 V, 10 mA to less than 500 mA.
Indoor unit type Connector
Compact cassette CN103
Slim duct CN103
Wall mounted
ASU7RLF1, ASU9RLF1, ASU12RLF1, ASU15RLF1 CNB01
ASU18RLF CN16
Floor AGU9RLF, AGU12RLF, AGU15RLF CN20
Locally purchased
Indoor unit
control PCB*1
Connected unit
Example: Display Example: Relay unit
Relay
power supply
DC 24 V
1
2
Signal
V
Connector
33 ft
(10 m)*2
On
Off
Operation
Stop
Indoor unit
Output signal