Fujitsu AOYG09KGCA - Page 26

¢
Others
Exterior Part name Model name Summary
External
connect kit
UT↔-↓→Z↓
Use to connect with various peripheral
devices and air conditioner PCB.
Connecting point: CN47 on Main PCB
External
connect kit
UT↔-↓→Z↓Z5
Required when external device is
connected.
Connecting point: CN47 on Main PCB
External input
and output PCB
UT↔-↓CS↓Z2
Use to connect with external devices
and air conditioner PCB.
Optional External connect kit is
necessary for installation.
Connecting point: CN65 on Main PCB
Communication
kit
UT↔-T→R↓Z2
Use to connect Non-polar 2-core wired
remote controller.
→ireless LAN
adapter
UT↔-TFS↓F2
Remotely manage an air conditioning
system using mobile devices such as
smartphones and tablets.
Appropriate application for each region
is required to use this option. For
details, contact FGL sales company.
Connecting point: Main PCB via USB
connector
Modbus
converter
UT↔-VMS↓
For connection between indoor unit
with UART interface and a Modbus
open network.
Connecting point: CN65 on Main PCB
KN↓ converter UT↔-VKS↓
For connection between indoor unit
with UART interface and a KN↓ open
network.
Connecting point: CN65 on Main PCB
Network
converter
UT↔-VTG↓
This converter is required when
connecting single split system to VRF
network system.
Use the terminal for wired remote
controller.
Network
converter
(AC power
supply)
UT↔-VTG↓V
This converter is required when
connecting single split system to VRF
network system.
Use the terminal for wired remote
controller.
External switch
controller
UT↔-TER↓
Air conditioner switching can be
controlled by connecting other external
sensor switches.
Use the terminal for wired remote
controller.
5-1. Indoor unit - (02-12) - 5. Optional parts
TECHNICAL DATA AND PARTS LIST TECHNICAL DATA AND PARTS LIST