7. Repeat steps 3 to 6 to perform additional settings. Press the SET TEMP. buttons ( ) ( )
and FAN button simultaneously again for more than 5 seconds to cancel the function setting
mode. In addition, the function setting mode will be automatically canceled after 1 minute if
no operation is performed.
8. After completing the function setting, be sure to turn off the power and turn it on again.
CAUTION
After turning off the power, wait 30 seconds or more before turning on the power again. The
function setting will not become active unless the power is turned off then on again.
- 27 -
DUCT TYPE
ARHG24LMLA
To Next Page
Loading...
Need help?
General
